top of page
EASYCHLORGEN.PNG

EASYCHLORGEN

Safe, reliable & efficient on-site generation of sodium hypochlorite

​

EASYCHLORGEN electro chlorination systems provide an on-demand supply of <1.0% sodium hypochlorite solution, generated through the electrolysis of diluted brine solution. The combination of storing low strength solution, the avoidance of chemical deliveries, handling and operator involvement significantly reduce the likelihood of any accidental spillage.

​

  • On-site electrolysis of brine for safe generation and preparation of
    <1% sodium hypochlorite solution

  • Safe and fully sealed electrolytic process

  • Easy to operate

  • Integrated control panel & OLED screen

  • Manual and automatic operation

  • Multilingual operating display option

  • Telemetry alarm event & data logging option

  • Chlorine production from 25 g/h to 8.5 kg/h

​

Benefits 

  • Eliminate delivery & handling of hazardous chemicals

  • Handle only salt

  • Generate on-site for on-demand or residual storage

  • Eliminate dosing pump air-locking associated with commercial hypochlorites

  • Eliminate injection point scaling associated with commercial sodium and calcium hypochlorites

  • Considerable Health & Safety benefit to operators

EASYCHLORGEN DATA.PNG

The EASYCHLORGEN is a system for the "in situ” production of the biocide active agent “active chlorine produced from sodium chloride via electrolysis“. In accordance with the biocide ordinance, as of 01/09/2015, the member states of the European Union may only use precursors for biocidal active agents produced "in situ" and which are used as disinfectants. These precursors must satisfy the quality requirements made of these substances by DIN EN and be sourced from a manufacturer or supplier listed in accordance with article 95 of the biocide ordinance. Please ask your supplier to confirm conformity with the biocide ordinance (certificate).


Biocidal active agent: Active chlorine produced from sodium chloride via electrolysis EC no. mix; CAS no. not applicable
Precursors: Sodium chloride EC no. 231-598-3; CAS no. 7647-15-5; Special salt for electrolytic cells DIN EN 16401 and 14805

bottom of page